Setting Up Ubiquiti UniFi from Scratch: Step-by-Step Guide
3 min readITNET
UbiquitiUniFiSetupTutorial
Setting Up UniFi from Scratch
You've bought a Ubiquiti UniFi Dream Machine (UDM) gateway and several access points. What's next? Here's a step-by-step guide. For other UniFi consoles (UDM Pro, UDM SE, UDR 7, Cloud Gateway) the process is almost the same.
Step 1: Connect the UDM
- Plug the ISP cable into the WAN port (on the UDM it sits separately from the four LAN ports)
- Connect your computer to any LAN port
- Connect the power
- Wait for it to boot: while the LED flashes white, the device is starting up; a steady white light means the UDM is ready for setup (this usually takes a few minutes)
Step 2: Initial Setup
- Install the UniFi app on your phone, or open setup.ui.com or 192.168.1.1 in a browser
- Create a Ubiquiti account (or sign in to an existing one)
- Follow the setup wizard:
- Network name (SSID)
- Wi-Fi password
- Time zone: Asia/Tashkent
- Internet connection type (usually DHCP)
Step 3: Connect the Access Points
- Connect the access point to a PoE switch or a PoE injector. The base UDM has no PoE ports; built-in PoE is available on models such as the UDM SE and UDR 7
- Wait until the access point LED turns steady white: it has booted and is waiting for adoption
- In the UniFi interface → Devices → click "Adopt"
- The access point will receive its Wi-Fi settings automatically; after adoption the LED turns blue
Step 4: Create a Guest Network
- Settings → WiFi → create a new Wi-Fi network
- Enable guest mode for it (Hotspot / guest network)
- Set a separate name (for example, "Office-Guest")
- Apply a speed limit with a bandwidth profile (for example, 10 Mbps)
- Enable client isolation
Step 5: Configure VLANs (Recommended)
Split the network into segments:
- VLAN 1 — Management (administrator only)
- VLAN 10 — Work devices
- VLAN 20 — Guest network
- VLAN 30 — IoT devices (cameras, sensors)
Useful Settings
- Threat Management → enable IDS/IPS (available on UniFi gateways, including the UDM; with protection enabled, maximum routing throughput depends on the model)
- Auto-optimize → enable for automatic network and Wi-Fi channel optimization
- Band steering → enable so that clients connect to 5 GHz whenever possible
Need Help?
We offer professional UniFi setup services. Contact us for a consultation.